TISP581.FRE.xxxxx.5/30.S.K6.11R.R2.LD2-530-encoder-programable-brida-reo

N.º de producto: TISP581.FRE.xxxxx.5/30.S.K6.11R.R2.LD2-530

4

TISP581.FRE.xxxxx.5/30.S.K6.11R.R2.LD2-530; TISP58-Series-Italsensor; programmable encoder TISP 58;

 

 

MECHANICAL SPECIFICATIONS

Dimensions: see drawings

Solid shaft: stainless steel (UNI EN 10088-3 DN. 1.4305)

Shaft loading: axial: 100 N; radial 100 N

Shaft rotational speed:10.000 RPM to short cycle time; 6.000 RPM continuous;

2000 giri/min with protection shaft

Starting torque at 25°C: 0,025 Nm; 0.040Nm with proof shaft; *(1)

Moment of inertia: 40 g cm2

Bearings life: 5 x 109 giri (minimo) - rev. min.

Weight: 0,3 kg

 

 

ELECTRICAL SPECIFICATIONS

Resolution: programmable from 1 to 65536

Output frequency: up to 300 kHz

Index pulse positioning: Index position freely settable

Programmable counting direction: user selectable (CW or CCW)

Power consumption: <500 mW (without load)

Protection: short circuit and inversion of polarity protection

 

MATERIALI UTILIZZATI - MATERIALS

Flange: aluminium non corroding

Housing: Polyamid 6 (PA6) - (metallic on request)

 

ENVIRONMENTAL SPECIFICATIONS

Operating temperature range: -25°C to +85ºC (100ºC on request)

Storage temperature range: -25ºC to +85ºC

Relative humidity : 98% RH without condensing

Vibrations: 10 g (From 10 up to 2.000 Hz)

Shock: 20 g (for 11 ms)

 

TYPE: TISP581 zero - bidirectional + index; 

 

ASSEMBLY: FRE: REO 444 Flange (Tk50)

 

PULSE RATE: programmable from 1 to 65536

If not specified will be set equal to 1024 PPR

 

Voltage supply: +5 to 30V; 

Output frequency: from 0 a - up to 300 kHz; 

Protection class: K6: IP 66 (EN60529) (F1-F3-SG1-S1-FRE);

Shaft: 11R: Ø11mm (Flange FRE - SG1);

OUTPUT CIRCUITS: LD2-530: Line-driver output 5V or 5/30V user selectable

ELECTRICAL CONNECTIONS OUTPUT: PP2 ; LD2

R2 on 12 pins radial “contact” connector;