Imprimir

Programmable encoder TISP 58

Programmable encoder TISP 58

Programmable encoder TISP 58
Logo Italsensor Tekel
TISP58-Encoder-incremental-programable-desde-1-a-65536-ppr-largo
 
datasheet
 
Download Manua and Software: Descarga-de-SoftwareManual-de-instrucciones
 
 
MECHANICAL SPECIFICATIONS
Dimensions: see drawings
Solid shaft: stainless steel (UNI EN 10088-3 DN. 1.4305)
Shaft loading: axial: 100 N; radial 100 N
Shaft rotational speed:10.000 RPM to short cycle time; 6.000 RPM continuous;
2000 giri/min with protection shaft
Starting torque at 25°C: 0,025 Nm; 0.040Nm with proof shaft; *(1)
Moment of inertia: 40 g cm2
Bearings life: 5 x 109 giri (minimo) - rev. min.
Weight: 0,3 kg
 
 
ELECTRICAL SPECIFICATIONS
Resolution: programmable from 1 to 65536
Output frequency: up to 300 kHz
Index pulse positioning: Index position freely settable
Programmable counting direction: user selectable (CW or CCW)
Power consumption: <500 mW (without load)
Protection: short circuit and inversion of polarity protection
 
MATERIALS
Flange: aluminium non corroding
Housing: Polyamid 6 (PA6) - (metallic on request)
 
ENVIRONMENTAL SPECIFICATIONS
Operating temperature range: -25°C to +85ºC (100ºC on request)
Storage temperature range: -25ºC to +85ºC
Relative humidity : 98% RH without condensing
Vibrations: 10 g (From 10 up to 2.000 Hz)
Shock: 20 g (for 11 ms)
 
TYPE: zero - bidirectional + index
 
ASSEMBLY: 
F1: Square flange (TK40)
F2: Square flange (TK45)
F3: Square flange (TK50)
SG1: Servo-clip (TK50)
SG2: Servo-clip (TK45)
SG3: Servo-clip
S1: Servo Flange
S2: Servo Flange (TK45)
FRE: REO 444 Flange (Tk50)
 
PULSE RATE: 
programmable
from 1 to 65536
If not specified will be set equal to 1024 PPR
 
Voltage supply: +5 to 30V
 
Output frequency: from 0 a - up to 300 kHz
 
Protection class:
K4: IP 64 (EN60529) (F1-F2-F3-SG1-SG2-SG3-S1-S2-FRE)
K5: IP 65 (EN60529) (F1-F3-SG1-S1-FRE)
K6: IP 66 (EN60529) (F1-F3-SG1-S1-FRE)
 
 
OUTPUT CIRCUITS:
PP2-530: Push-Pull output 5V or 5/30V user selectable
LD2-530: Line-driver output 5V or 5/30V user selectable
Other electronics interface on demand
 
ELECTRICAL CONNECTIONS
OUTPUT: PP2 ; LD2
R2 on 12 pins radial “contact” connector
Others connections type on request
 
Shaft:
6: Ø6mm  (Flange F1- F2 - F3 - SG1 - SG2 - SG3 - S1 - S2)
8: Ø8mm (Flange F1- F2 - F3 - SG1 - SG2 - S1 - S2)
9,52: Ø9,52mm (Flange F1- F2 - F3 - SG1 - SG2 - S1 - S2)
10: Ø10mm (Flange F1- F2 - F3 - SG1 - SG2 - S1 - S2)
11: Ø11mm (Flange FRE - SG1)
11R: Ø11mm (Flange FRE - SG1)
 
TISP58-Encoder-optico-incrementa-programable-con-rs232-drawing
 
TISP58-Encoder-optico-incrementa-programable-con-rs232-drawing2
TISP58-Encoder-optico-incrementa-programable-con-rs232-drawing3
 
 
TISP58-Encoder-incremental-programable-desde-1-a-65536-pp
 
Others Italsensor Tekel encoders:
 
Logo Italsensor

Mostrar por página
Ordenar por
N.º de producto: TISP581.FRE.xxxxx.5/30.S.K6.11R.R2.LD2-530

TISP581.FRE.xxxxx.5/30.S.K6.11R.R2.LD2-530-encoder-programable-brida-reo

N.º de producto: TISP581PRGCBL.20

TISP581PRGCBL.20; Programming cable TISP581PRGCBL.20 for incremental programmable encoder TISP58;

*
Los precios no incluyen el IVA ni la entrega

Programmable Encoders Manual and Software

Programmable Encoders Manual and SoftwareÁrea protegida

Programmable Encoders Manual and Software