TISP581.FRE.xxxxx.5/30.S.K6.11R.R2.LD2-530-encoder-programable-brida-reo


TISP581.FRE.xxxxx.5/30.S.K6.11R.R2.LD2-530-encoder-programable-brida-reo

N.º de producto: TISP581.FRE.xxxxx.5/30.S.K6.11R.R2.LD2-530
TISP581.FRE.xxxxx.5/30.S.K6.11R.R2.LD2-530; TISP58-Series-Italsensor; programmable encoder TISP 58;
 
datasheet
 
MECHANICAL SPECIFICATIONS
Dimensions: see drawings
Solid shaft: stainless steel (UNI EN 10088-3 DN. 1.4305)
Shaft loading: axial: 100 N; radial 100 N
Shaft rotational speed:10.000 RPM to short cycle time; 6.000 RPM continuous;
2000 giri/min with protection shaft
Starting torque at 25°C: 0,025 Nm; 0.040Nm with proof shaft; *(1)
Moment of inertia: 40 g cm2
Bearings life: 5 x 109 giri (minimo) - rev. min.
Weight: 0,3 kg
 
 
ELECTRICAL SPECIFICATIONS
Resolution: programmable from 1 to 65536
Output frequency: up to 300 kHz
Index pulse positioning: Index position freely settable
Programmable counting direction: user selectable (CW or CCW)
Power consumption: <500 mW (without load)
Protection: short circuit and inversion of polarity protection
 
MATERIALI UTILIZZATI - MATERIALS
Flange: aluminium non corroding
Housing: Polyamid 6 (PA6) - (metallic on request)
 
ENVIRONMENTAL SPECIFICATIONS
Operating temperature range: -25°C to +85ºC (100ºC on request)
Storage temperature range: -25ºC to +85ºC
Relative humidity : 98% RH without condensing
Vibrations: 10 g (From 10 up to 2.000 Hz)
Shock: 20 g (for 11 ms)
 
TYPE: TISP581 zero - bidirectional + index; 
 
ASSEMBLY: FRE: REO 444 Flange (Tk50)
 
PULSE RATE: programmable from 1 to 65536
If not specified will be set equal to 1024 PPR
 
Voltage supply: +5 to 30V; 
Output frequency: from 0 a - up to 300 kHz; 
Protection class: K6: IP 66 (EN60529) (F1-F3-SG1-S1-FRE);
Shaft: 11R: Ø11mm (Flange FRE - SG1);
OUTPUT CIRCUITS: LD2-530: Line-driver output 5V or 5/30V user selectable
ELECTRICAL CONNECTIONS OUTPUT: PP2 ; LD2
R2 on 12 pins radial “contact” connector;
 
TISP58-Encoder-incremental-programable-desde-1-a-65536-ppr-largo
 
TISP58-Encoder-optico-incrementa-programable-con-rs232-drawing3
 
 
Manual-de-instrucciones
 
Descarga-de-Software

Accesorios

Producto Nota Estado Precio
TISP581PRGCBL.20; Programming cable TISP581PRGCBL.20 for incremental programmable encoder TISP58; TISP581PRGCBL.20; Programming cable TISP581PRGCBL.20 for incremental programmable encoder TISP58;
Programming cable
Mostrar detalles del accesorio

Examine también estas categorías: Programmable encoder TISP 58, Dinamos/encoders/generadores, Encóders/Generadores de impulsos, Encóders incrementales, encóders absolutos, encóders magnéticos, ruedas métricas, ..., mantenimiento, tekel, Encóders incrementales, Encoder incremental para la industria de la madera TKW615, Productos de Ermec para Gruas, Home