TISP581.FRE.xxxxx.5/30.S.K6.11R.R2.LD2-530-encoder-programable-brida-reo

Código do produto: TISP581.FRE.xxxxx.5/30.S.K6.11R.R2.LD2-530
TISP581.FRE.xxxxx.5/30.S.K6.11R.R2.LD2-530; TISP58-Series-Italsensor; programmable encoder TISP 58;
 
datasheet
 
MECHANICAL SPECIFICATIONS
Dimensions: see drawings
Solid shaft: stainless steel (UNI EN 10088-3 DN. 1.4305)
Shaft loading: axial: 100 N; radial 100 N
Shaft rotational speed:10.000 RPM to short cycle time; 6.000 RPM continuous;
2000 giri/min with protection shaft
Starting torque at 25°C: 0,025 Nm; 0.040Nm with proof shaft; *(1)
Moment of inertia: 40 g cm2
Bearings life: 5 x 109 giri (minimo) - rev. min.
Weight: 0,3 kg
 
 
ELECTRICAL SPECIFICATIONS
Resolution: programmable from 1 to 65536
Output frequency: up to 300 kHz
Index pulse positioning: Index position freely settable
Programmable counting direction: user selectable (CW or CCW)
Power consumption: <500 mW (without load)
Protection: short circuit and inversion of polarity protection
 
MATERIALI UTILIZZATI - MATERIALS
Flange: aluminium non corroding
Housing: Polyamid 6 (PA6) - (metallic on request)
 
ENVIRONMENTAL SPECIFICATIONS
Operating temperature range: -25°C to +85ºC (100ºC on request)
Storage temperature range: -25ºC to +85ºC
Relative humidity : 98% RH without condensing
Vibrations: 10 g (From 10 up to 2.000 Hz)
Shock: 20 g (for 11 ms)
 
TYPE: TISP581 zero - bidirectional + index; 
 
ASSEMBLY: FRE: REO 444 Flange (Tk50)
 
PULSE RATE: programmable from 1 to 65536
If not specified will be set equal to 1024 PPR
 
Voltage supply: +5 to 30V; 
Output frequency: from 0 a - up to 300 kHz; 
Protection class: K6: IP 66 (EN60529) (F1-F3-SG1-S1-FRE);
Shaft: 11R: Ø11mm (Flange FRE - SG1);
OUTPUT CIRCUITS: LD2-530: Line-driver output 5V or 5/30V user selectable
ELECTRICAL CONNECTIONS OUTPUT: PP2 ; LD2
R2 on 12 pins radial “contact” connector;
 
TISP58-Encoder-incremental-programable-desde-1-a-65536-ppr-largo
 
TISP58-Encoder-optico-incrementa-programable-con-rs232-drawing3
 

Acessórios

Produto Nota Estado Preço
TISP581PRGCBL.20; Programming cable TISP581PRGCBL.20 for incremental programmable encoder TISP58; TISP581PRGCBL.20; Programming cable TISP581PRGCBL.20 for incremental programmable encoder TISP58;
Programming cable
Mostrar detalhes do acessório

Procurar também nestas categorias: TISP58-Series-Italsensor; programmable encoder TISP 58, Dynamos/Encoders, Encoders /Geradores de pulsos, Encoders_italsensor, mantenimiento, Tekel, Encoder_incremental_para_la_industria_de_la_madera_TKW615, Gruas