Configuration: Standard magnet
Approval: Approval standard
Voltage/Frequency: 24V/50Hz
Direction: Reversible
Connector: flex print
Rated frequency: 50Hz
Speed: 600rpm
Running torque Mn: 0.6mNm
Detent torque Ms: 0.3mNm
Power Output: 0.038W
Power consumption: 0.75VA
Rotor inertia Jr: 0.033gcm2
Tolerance of voltage: standard power supply system +10%/-10%
Duty cycle: 1
Winding temperature Tmax: 130ºC
Direction of rotation: reversible
Rated voltage UN: 24V
Operating capacitor C50: 2.2?F/40VAC
Dimmensions: Diam.13 x 11mm
Speed 50Hz: 600rpm
Pole number: 10
Running torque 50Hz/60Hz: 0.6mNm
Power Output(50Hz/60Hz): 0.038W
Gear combination: -

Climatic class: "wide-spread" according to DIN IEC 60721-2-1
Ambient temperature operation: ºC -15 …+60
Ambient temperature storage: ºC -20 …+100
Thermal resistance at f=0 Rtherm: 83K/W
Thermal class: B according to DIN EN 60085
Approval: Standard
Mounting: any position
Electrical connection: Pin, optional flex print
Protection: IP40 according to DIN EN 60529
Weight: 7g
Rotor stalling: motor can be stopped when voltage is applied, without being overheated
Bearings: integrated high temperature plastic bearing